View
364
Download
22
Category
Tags:
Preview:
DESCRIPTION
To provide solutions for the most complex coverage requirements, indoors and out. Fiplex coverage extension solutions are designed to satisfy the rigorous demand for providing service in areas outside the reach of the base stations be that voice communications, data and wireless internet. Thanks to the modular philosophy of the design, the Fiplex coverage extension solutions allow for the ability to provide services from one operator and in one band to multiple operators using diverse bands, covering needs from FM to LTE, permitting the coexistence of differing technologies simultaneously, without any quality of service degradation. From simple coverage needs in small areas to coverage of complex scenarios involving large structures, the Fiplex coverage extension solutions can be scaled from a few antennas to a large DAS, either via coaxial cables to fiber optic. Fiplex is experienced in providing everything from a single office signal booster to the most demanding and complex dual band, fiber DAS system for large campuses. Our DAS expertise has allowed us to create unique coverage solutions over large coverage areas at a reduced cost to the end user due to our DAS architecture. The robust design allows the Fiplex solutions to continue in operation for long periods, reducing the cost of maintenance due to service failures. In order to offer better system management, Fiplex coverage extension products have the capability of being controlled and operated remotely, permitting the system operator to have access in real time to the commands and alarms without the requirement of local maintenance personnel near each site.
Citation preview
www.fiplex.com
Repeaters
www.fiplex.com
FM & VHF REPEATERS
www.fiplex.comRepeaters for FM
• Unidirectional Amplifiers for indoor coverage of FM signals.• Band Selective and Channel Selective versions.• FM Break In as optional for local SOS broadcasted messages over FM
channels.• AGC and Overload protection.• Antenna isolation control.• Outdoor cabinet. • Remote control capability (option RC-G).• Fiber Feed capability (option FO-CT).• Band Selective models:
• MF24V• HF30V• HF40V
• Channelized models:• MF24Cx (replace “x” by channels qty)• HF40Cx (replace “x” by channels qty)
www.fiplex.comRepeaters for VHF
• Repeater for Large size applications.• Single band.• 2MHz BW (SW adjustable).• 5MHz min Tx to Rx separation.• +30dBm and +40dBm output power.• 80dB gain adjustable.• AGC and Overload protection.• Outdoor cabinet.• Remote control capability (option RC-G).• Fiber Feed capability (option FO-CT).• Model:
• H130V• H140V
www.fiplex.com
TETRA & UHF REPEATERS
www.fiplex.comLow Power Repeaters
• For P25, TETRA, IDAS, Mototrbo, Nexedge, MPT, CDMA450 and others.• Repeater for Small and Medium size. applications.• Single band as standard, multiband as optional.• 2MHz and 5MHz BW (SW adjustable).• 5MHz and 10MHz split.• +18dBm and +24 dBm output power.• 70dB gain adjustable.• AGC and Overload protection.• Antenna isolation control.• Outdoor cabinet.• Remote control capability (option RC-G).• Fiber Feed capability (option FO-CT).• Band Selective models:
• M318V – meets ETSI, +18dBm• M424V – meets FCC, +24dBm
www.fiplex.comHigh Power Repeaters
• For P25, TETRA, IDAS, Mototrbo, Nexedge, MPT, CDMA450 and others.• Repeater for Large size applications, indoor and outdoor.• Single band as standard, multiband as optional.• 2MHz and 5MHz BW (SW adjustable).• 5MHz and 10MHz split.• +36dBm and +37 dBm composite output power.• 80dB gain adjustable.• AGC and Overload protection.• Antenna isolation control.• Outdoor cabinet.• Remote control capability (option RC-G).• Fiber Feed capability (option FO-CT).• Band Selective models:
• H336V – meets ETSI, +36dBm• H437V – meets FCC, +37dBm
www.fiplex.comHigh Power Channel Selective Repeaters for UHF
• For P25, TETRA, IDAS, Mototrbo, Nexedge, MPT, CDMA450 and others.• Repeater for Large size applications, indoor and outdoor.• From 2 channels and up.• 50KHz BW.• +36 dBm.• 85dB gain adjustable.• AGC and Overload protection.• Antenna isolation control.• Outdoor cabinet.• Remote control capability (option RC-G).• Fiber Feed capability (option FO-CT).• Band Selective models:
• H436Cx (replace “x” by channels number) – meets ETSI & FCC
www.fiplex.com
CELLULAR REPEATERS
www.fiplex.comRepeaters for Cellular Applications
• From LTE 700MHz to LTE 2.6GHz• SOHO applications:
• P Series
• Medium Size applications:• C Series
• Large Size applications:• H Series – Band selective• H Series – Channel Selective
• Leaky cable applications:• IB Series
www.fiplex.comP Series, +10dBm
• Repeater for SOHO applications.• Single band.• Band Selective (SAW filtered):
• Full band• Narrow band: center frequency USB adjusted
• 65dB gain adjustable & +10dBm output power.• RSSI and Feedback indicators.• AGC and Overload protection.• Indoor cabinet.• For LTE 700, LTE 800, 850MHz, EGSM, DCS, PCS, UMTS, AWS, LTE 2600• Compatible GSM, CDMA, WCDMA, 1X, HSDPA, GPRS/EDGE, LTE• Models:
• P610, for LTE 700MHz A,B• PL10, for LTE 700MHz C• PC10, for 850MHz• P810, for LTE 700MHz 800• PE10, for EGSM 900
• PD10, for DCS• PP10, for PCS• PA10, for AWS• PU10, for UMTS 2100• P210, for LTE 2600
www.fiplex.comC Series, +18/+20dBm
• Repeater for Medium Size applications.• Single band.• Band Selective (SAW filtered):
• Full band• Narrow band: center frequency USB adjusted
• 70dB gain adjustable & +18/+20dBm output power.• RSSI and Feedback indicators.• AGC and Overload protection.• Remote controlled as optional• Indoor cabinet.• For LTE 700, LTE 800, 850MHz, EGSM, DCS, PCS, UMTS, AWS, LTE 2600• Compatible GSM, CDMA, WCDMA, 1X, HSDPA, GPRS/EDGE, LTE• Models:
• C620, for LTE 700MHz A,B• PL20, for LTE 700MHz C• PC20, for 850MHz• P820, for LTE 700MHz 800• PE18, for EGSM 900
• PD18, for DCS• PP20, for PCS• PA20, for AWS• PU20, for UMTS 2100• P218, for LTE 2600
www.fiplex.comBDA Series – Band Selective
• Repeater for Large Size applications.• Single band as standard, multiband as optional.• Band Selective (SAW filtered):
• Single band pass, software adjustable• Dual band pass, fix BW and center frequency adjustable
• 70dB gain / 24dBm output power.• 80dB gain adjustable & +30/+37dBm output power.• RSSI and Feedback indicators.• AGC and Overload protection.• Indoor and Outdoor versions.• For LTE 700, LTE 800, 850MHz, EGSM, DCS, PCS, UMTS, AWS, LTE 2600• Compatible GSM, CDMA, WCDMA, 1X, HSDPA, GPRS/EDGE, LTE• Remote control capability (option RC-G).• DAS Fiber Feed capability (option FO-CT).
www.fiplex.comBDA Series – Channel Selective
• Repeater for Large Size applications.• Single band.• Channel Selective (SAW filtered):
• 4 and 8 channels• 200KHz, 1.25MHz, 5MHz and 10MHz BW• Mix of filters BW for hybrid/multi technology systems
• 80dB gain adjustable & +37dBm output power.• RSSI and Feedback indicators.• AGC and Overload protection.• Outdoor cabinet.• For LTE 700, LTE 800, 850MHz, EGSM, DCS, PCS, UMTS, AWS, LTE 2600• Compatible GSM, CDMA, WCDMA, 1X, HSDPA, GPRS/EDGE, LTE• Remote control capability (option RC-G).• DAS Fiber Feed capability (option FO-CT).
www.fiplex.comIB Series – Line Amplifiers
• For long runs and leaky cable systems• Compensation of cable loss• Single band, fullband.• +20dBm output power• 30dB gain adjustable• RSSI indicator.• AGC and Overload protection.• Indoor cabinet.• For LTE 700, LTE 800, 850MHz, EGSM, DCS, PCS, UMTS, AWS, LTE 2600• Compatible GSM, CDMA, WCDMA, 1X, HSDPA, GPRS/EDGE, LTE
www.fiplex.com
REMOTE CONTROLMANAGEMENT TOOL
www.fiplex.comFOMS – O&M Software
• Model: FOMS• FIPLEX OMS: BDA Administrator System & BDA Control System.• Real-time.• Server – client.• Parameters and alarms.• Via SMS / packet data.• Treeview.• SQL database engine.• Individual users profiles, permissions.
www.fiplex.comRC-G – Remote Control Unit
• Model: RC-G• Option for remote supervision of Repeaters.• Repeater alarms reports.• Suitable for BDA Series.• Link via GSM network.• Proprietary protocol.• Factory installed.• Works with FOMS platform.• Applies for all lines of Repeaters (except P and CBDA Series) and MOUs.
www.fiplex.com
ANTENNAS AND PASSIVE DEVICES
www.fiplex.comMulti Band Combiners
• Broadband response.• To combine HF, FM, VHF, 380-430, UHF, LTE800, EGSM, GSM-R, DCS, UMTS
and LTE2.6• Single and multiple output ports.• Indoor and Outdoor versions.• Rack or Wall mount.• N(f) connectors.• Up to 100W per input port.
www.fiplex.comIndoor Omni Antenna
• FIP1000• Dome type.• Roof mount.• 800 – 2500MHz, suitable for GSM to WLAN.• 3dBi gain.• Vertical polarization, 55 degrees.• Indoor type.• N(f) connectors.• Maximum power 100W.
www.fiplex.comIndoor Panel Antenna
• FIP2001• Panel type.• Wall mount.• 800 – 2500MHz, suitable for GSM to WLAN.• 8dBi gain.• Vertical polarization, 58 degrees.• Horizontal aperture 68 degree.• Front – Back ratio 15dB min.• Indoor type.• N(f) connectors.• Maximum power 100W.
www.fiplex.comOutdoor Panel Antenna
• FIP2004• Panel type.• Wall and Pipe mount.• 800 – 2500MHz, suitable for GSM to WLAN.• 7dBi gain.• Vertical polarization, 58 degrees.• Horizontal aperture 87 degree.• Front – Back ratio 20dB min.• Outdoor type• N(f) connectors• Maximum power 50W.
www.fiplex.comCoaxial Splitters
• PSC Series.• 2, 3 and 4 ways.• High power handling capability up to 500W.• From VHF to 2700MHz• 700-2700MHz broadband models.• Low insertion loss.• Low PIM, 160dBc typ.• Indoor and outdoor versions.• N(f) and 7/16(f) connectors.
www.fiplex.comBroadband Splitters
• DPS Series.• 2, 3 and 4 ways.• Power handling capability as splitter of 50W.• 700-2700MHz broadband models.• Low insertion loss.• Low PIM, 160dBc typ.• Indoor versions.• N(f) type connectors.
www.fiplex.comRF Directional Couplers
• RSA Series.• 6, 10, 15, 20 and 30dB coupling values.• High power handling capability up to 200W.• From VHF to 2700MHz• 800-2500MHz broadband models.• Low insertion loss.• Low PIM, 160dBc typ.• Outdoor use.• N(f) and 7/16(f) connectors.
www.fiplex.com
Fiplex Communications, Inc.
Headquarters & Distribution Center7331 N.W. 54th Street. Miami, FL 33166. US
Ph: +1 305 884 8991
info@fiplex.comwww.fiplex.com
Recommended