How to Make a Red Oval Round Necklace DIY Jewelry Making Tutorial

How to Make:Red Oval Round Necklace

Materials:Chain Nose PliersWire Cutters13” Bead Stringing Wire20 6mm Beads2 Wire Protectors5 Jump RingsA ClaspTwo 3” Chain Pieces10 5mm Corrugated BeadsCrimping Pliers8 8mm Oval Corrugated Beads2 Crimp Covers2 Crimps33 x 24 mm Oval CharmTwo 20mm Round Charms

Step 1:Open up your jump rings using your pliers and attach them to your three large beads.

Step 2:Arrange your necklace into the pattern that you wish to have. This is the preferable design pictured below.

Step 3:Insert your crimp bead onto your bead stringing wire and then string the wire through both sides of the cable thimble. Once you have done this and made sure that the chain is secure, slide on the chain and put the wire back through the crimp bead. Crimp with crimping pliers.

Step 4:String your pre-arranged beads on one by one.

Step 5:Attach your clasp and jump rings and your new necklace is ready to wear!