stone cladding

STONE CLADDING

Lecture by: Ar. Navdeep shukla

All external anchors, dowels and fixings should be of stainless steel or other

corrosion resistant materials. Any metal dowels and fixings securing the

cladding panels should be suitable, permanent and adequately protected

from corrosion.

Height of the façade must be less than 28 m if the joints are filled with mortar

and less than 18 m if the joints are not filled

TIES

Corrosion resistant wire (copper,

brass ,stainless steel or zintane)brass ,stainless steel or zintane)

DIAMETERS

-5mm for slabs 30 to 40mm thick

-6mm for slabs graeter than 40 mm

thick

AIR SPACE

The distance between the back of the stone and the

reference plane of the support or the insulation must be

greater than equal to 2cm

FIXING THE ANCHOR IN THE SUPPORT

-either by embedding the anchor with cement mortar

-or by mechanical means using stainless steel wedge –type compatible

with the metal of the tie

cladding

ties

Wall cladding consisting of stone slabs attached to a stable

support by ties, these ties are coated in a plug of mortar ,in a

ventilated air space created between the cladding and the support