View
426
Download
1
Category
Preview:
Citation preview
8/3/2009
Eng. Bashar Alzuwayer
Automotive Engines Tech.ME-111
Eng. Bashar Alzuwayer11/10/2009
Lecture’s Topics
• Basic Hand Tools. • Power Tools & Equipments.• Automotive Shop Safety.• Measurements.
Chapters covered: 3, 4, 5.
1Eng. Bashar Alzuwayer
Basic Hand tools
Basic Hand Tools
Tools rule:1- Use quality tools.2- Keep tools organized.3- Keep tools clean.4- Use the right tool for given job.
3Eng. Bashar Alzuwayer
Wrenches
They are used to remove and install nuts and bolts. Following these rules:
1- Select the right size always.
2- Never hammer standard wrenches, use slug wrench if you have to use hammer.
4Eng. Bashar Alzuwayer
Types of Wrenches
Wrenches come in two sizes, Metric or ِِِEnglish. There are five types of wrenches:
1.Open End Wrench.2.Box End Wrench.3.Combination Wrench.4.Line Wrench.5.Socket Wrench.
5Eng. Bashar Alzuwayer
8/3/2009
Eng. Bashar Alzuwayer
Open End Wrenches
They have open, split, jaw on each end, the jaws are weak and should not be used for extremely tight nuts and bolts, the jaws will flex or round off the bolt head.
6Eng. Bashar Alzuwayer
Box End Wrenches
They have completely closed ends to surround the bolt, they will not round off the bolt head easily, they come with 6 points or 12 points. 6 points is stronger and should be used for rusted strong bolts.
7Eng. Bashar Alzuwayer
Combination Wrenches
• They have box end and open end, it offers two different wrenches on the same piece, usually they both ends have the same size.
8Eng. Bashar Alzuwayer
Line Wrenches
• Also called tubing, or flare nut wrench.• It has a box end, but with a small opening.• It is used for brake lines, fuel lines and power
steering lines, it prevents soft fittings from damage.
9Eng. Bashar Alzuwayer
Socket Wrenches
• It is cylindrical shaped, box end tool the fits over the bolt. The other end has squared hole to fit the socket handle on.
10Eng. Bashar Alzuwayer
Socket Handles
11Eng. Bashar Alzuwayer
8/3/2009
Eng. Bashar Alzuwayer
Screwdrivers
Phillips Head
Standard Head
Reed and Prince Head
Clutch Head
Torx Head
12Eng. Bashar Alzuwayer
Screwdrivers
13Eng. Bashar Alzuwayer
Pliers
• Could be used to cut, grip, hold and bend various parts. There are many types of pliers each is used for specific job.
14Eng. Bashar Alzuwayer
Slip Joint Pliers
• Also called combination pliers.
• The jaws are adjustable to grasp different size parts.
15Eng. Bashar Alzuwayer
Rib Joint Pliers
• Also called channel lock pliers or water pump pliers.
• It has extra wide jaws to hold heavy parts.
16Eng. Bashar Alzuwayer
Needle Nose Pliers
• For holding small parts only.
• Do not twist to hard, otherwise you will break the tips.
17Eng. Bashar Alzuwayer
8/3/2009
Eng. Bashar Alzuwayer
Vise Grips Pliers
• Also called locking pliers.• Used to hold two parts
firmly, to free the technician hands.
• Also used to remove damaged bolt head.
• Should never be used on undamaged bolts.
18Eng. Bashar Alzuwayer
Snap Ring Pliers
• Have sharp and small tips.• Used to remove special
clips called snap rings.
19Eng. Bashar Alzuwayer
Hammers
• Hammers Rules:1. Select the right size.2. Check hammer head
tightness.3. Use brass, plastic or dead
blow hammers, if the part could be damaged by steel.
4. Use steel hammer if maximum force is needed.
5. Always strike squarely
20Eng. Bashar Alzuwayer
Ball Peen Hammer
• It is the most used hammer and it is a general purpose hammer.
• It has two faces, a flat face for general striking and a round face for shaping sheet metals.
21Eng. Bashar Alzuwayer
Sledge Hammer.
• It has a very large and heavy head.
• It is the most powerful hammer used to remove frozen parts.
22Eng. Bashar Alzuwayer
Brass Hammer
• It has a soft head made of brass.• Usually used to prevent the part from scarring, in
other words, to protect the part from being damaged by the hammer.
23Eng. Bashar Alzuwayer
8/3/2009
Eng. Bashar Alzuwayer
Plastic Hammer
• Used when light striking is needed, to prevent the parts for damage.
24Eng. Bashar Alzuwayer
Rubber mallet
• It has a head that is made of hard rubber. Not recommended to be used on solid metal parts, since it will bounce and rebound.
• Used on sheet metal or plastic parts.
25Eng. Bashar Alzuwayer
Chisels and Punches
• Chisels are used for cutting damaged or rusted nuts, bolts and rivet heads.
• Punches are used to make parts for reassembly.
26Eng. Bashar Alzuwayer
Handling Tools
• Vice, is used for holding parts during cutting, drilling, hammering and pressing operations.
• C- Clamps also used for holding parts on a work surface during drilling, cutting welding, it is a portable holding tool.
27Eng. Bashar Alzuwayer
Power Tools and equipmetn
Power Tools & Equipment
• Power tools are tool driven by compressed air, electricity, or pressurized liquid. They make the operations easier and quicker.
• Shop equipment are large shop tools such as floor jacks, part cleaning tanks, steam cleaners .. etc.
29Eng. Bashar Alzuwayer
8/3/2009
Eng. Bashar Alzuwayer
Compressed Air System
30Eng. Bashar Alzuwayer
Compressed Air System
• The system includes the following parts:1. Air compressor unit: it has an electric motor that
compresses air inside the tank to keep the pressure level high.
2. Filter: to remove water from the air.3. Pressure regulator: used to set the pressure exiting
from the unit, usually between 100-150 Psi.4. Lubricator: to lubricate the tools.5. Hoses & Lines: to carry compressed air.
31Eng. Bashar Alzuwayer
Air Tools
• Air tools use the energy of compressed air for operation, also called pneumatic tools.
• Some air tools:1.Air wrenches.2.Air ratchet.3.Impact Sockets.4.Air Hammer.5.Blowgun.6.Air Drill 32Eng. Bashar Alzuwayer
Air wrenches
• Air wrenches or impact wrenches are used to quickly remove on install threaded fasteners.
33Eng. Bashar Alzuwayer
Air Ratchet
• It is a special impact wrench designed to work in limited spaces.
34Eng. Bashar Alzuwayer
Impact Sockets
• Impact sockets are special sockets that should be used with air wrenches or air ratchets.
• Ordinary sockets could be totally damaged if used with air wrenches.
35Eng. Bashar Alzuwayer
8/3/2009
Eng. Bashar Alzuwayer
Air Hammer
• It is useful for driving or cutting operations.• Used for cutting old rusted parts.• It can produce 1000 – 4000 impacts per minute
36Eng. Bashar Alzuwayer
Blowgun
• Used to clean, dry, wash parts with solvents.
37Eng. Bashar Alzuwayer
Air Drill
• It is multiuse powerful tool, it performs job too quickly with less effort.
• Could be used to drill, brush, cleaning and filing.
38Eng. Bashar Alzuwayer
Electric Tools
• There are many electric tools that could be used in automotive shops, some of them:
1.Bench grinder.2.Drills.3.Press Drills.
39Eng. Bashar Alzuwayer
Bench Grinder
• Could be used for grinding, cleaning and polishing operations.
• It has two wheels, one for grinding and the other one for cleaning and polishing
40Eng. Bashar Alzuwayer
Drills
• Are used to make holes in plastic or metal parts.• The drill bit should be chosen according to
material the would be drilled.
41Eng. Bashar Alzuwayer
8/3/2009
Eng. Bashar Alzuwayer
Press Drills
• Are large drills, bench mounted. It allows the bit to be pressed against the work piece with increased force.
42Eng. Bashar Alzuwayer
Hydraulic Tools
• Hydraulic tools use the power of pressurized liquid.
• Some hydraulic tools:1.Floor jack.2.Transmission jack.3.Engine crane (hoist).4.Hydraulic press.
43Eng. Bashar Alzuwayer
Floor and Trans Jacks
44Eng. Bashar Alzuwayer
Engine Crane
45Eng. Bashar Alzuwayer
Hydraulic Press
• Used to remove or install gears, pulleys, bearings, seals and other parts that need high pushing force.
46Eng. Bashar Alzuwayer
Shop Equipment
Some shop equipment:1.Arbor press.2.Jack stands.3.Engine stands.4.Pullers.
47Eng. Bashar Alzuwayer
8/3/2009
Eng. Bashar Alzuwayer
Arbor Press
• It is the same as hydraulic press but it does not use hydraulic power. Used to install small parts like bearings.
48Eng. Bashar Alzuwayer
Jack & Engine Stands
49Eng. Bashar Alzuwayer
Pullers
• Used to remove seals, gears, pulleys, axles and other press fit parts.
50Eng. Bashar Alzuwayer
Auto shop & safety
Shop Layout
• There are many areas in the auto shop, some of them:
1. Repair Area.2. Tool Room.3. Class Room.4. Locker Room.
52Eng. Bashar Alzuwayer
Repair Area
• It is any area where repairs are performed, it includes:
1.Shop stall.2.Lift.3.Alignment rack.4.Out side area.
53Eng. Bashar Alzuwayer
8/3/2009
Eng. Bashar Alzuwayer
Tool Room & Class Room
• Tool room is used to store shop tools, small equipment and supplies (nuts, bolts, oil, etc).
• Class room is used for seminars, demonstrations and other training activities.
• Also, any workshop should include a locker or dressing room for technicians.
54Eng. Bashar Alzuwayer 55Eng. Bashar Alzuwayer
Shop Safety
• Every year thousands of technicians are accidently injured or killed on the job, and that is due to their negligence of safety standards.
• Always while working look around and think of safety, look for unsafe work habits, unsafe equipment and other potentials for accidents.
56Eng. Bashar Alzuwayer
Types of Accidents
• Work shop accidents, could be one of these:
57Eng. Bashar Alzuwayer
Fires. Chemical burn.
Explosions. Electrical shock.
Asphyxiation. Physical injuries.
Fires
• Some combustible substances ( gasoline, oily rags, paints, thinners).
• General rules:1. Store gasoline in approved & sealed container.2. Disconnect the battery before working.3. Wipe up gasoline spills immediately.4. Keep heat away from gasoline.5. Do not use gasoline as a cleaning solvent.
58Eng. Bashar Alzuwayer
Explosions
• An explosion is rapid combustion that would create a powerful shock wave that travel through the shop.
• When charging a battery, Hydrogen is produced, which is highly combustible gas with colorless flame.
• Keep heat away from the gasoline tank, since the gasoline tank is vented to the atmosphere.
59Eng. Bashar Alzuwayer
8/3/2009
Eng. Bashar Alzuwayer
Asphyxiation
• Is caused by breathing toxic gases such as the exhaust gas which is extremely toxic gas.
• When operating a vehicle in enclosed area, the tailpipe should be connected to a ventilation system.
• There are many shop substances that are harmful if inhaled, for example brake dust (asbestos).
60Eng. Bashar Alzuwayer
Chemical Burns
• Solvents (part cleaners), battery acid and other shop substances could cause chemical burns to the skin, you should wear protection gloves.
• Carburetor cleaner is very powerful and can burn your skin in seconds.
61Eng. Bashar Alzuwayer
62Eng. Bashar Alzuwayer
Recommended