Microbrewery equipment for sale

Brewery EquipmentStrong Points

PRESENTED BY JINAN XIMO INTERNATIONAL TRADE CO., LTD.

Quality of the Material

Our company (Jinan

XIMO International Trade

Co., LTD.) only uses

Austenitic Stainless Steel

304/316 produced from

virgin ores in order to

ensure that the ratio of

18/8 and 18/10

(Chromium/Nickel

percentages) is always

met.

Example of a Quality Certificate that we provide our customers that shows the

chemical composition used for the production of the Stainless Steel.

All Production is Meticulously Done by Hand

One thing that we are really proud of is that all of our brewery equipment is produced by hand by our very experienced manufacturing employees (with about 20 years of experience.)

This allows us to tailor any equipment to meet the specific needs of any of our clients with any design that they might have in mind. Not only that, we ensure that all welding and polishing will be properly made to ensure both the safety of the client as well as provide an aesthetically appealing exterior.

Leftt: Example of an exterior tank shaped by hand and temporarily welded to ensure

that the dimensions are correct.

Right: Red Arrow: Hand welded, cleaned and polished by our employees

Yellow Arrow: Machine Welded

Example of how a properly polished finish for tubing on a tank would look like.

Example of a hand welded dual zone

glycol jacketed fermenter that has not

been finalized. Because it is handmade,

this gives us the flexibility to provide any

modifications in order to optimize the

surface area that the dimple plate jacket

would cover.

Red Arrow: Finalized hand welding on a

fermenter.

Green Arrow: Finalized hand polishing on a fermenter on a mirror coated fermenter.

Red Arrow: We ensure that every single

polish is properly smoothed out (especially on any mirror coated equipment.)

We only use High Quality

Components that will last a very

long timeFor every single equipment, we ensure that we are using

the best components we can provide in order to

guarantee our customer that they are receiving a high end

product that will provide consistency in their brews and

that will work time and time again for a very, very long

time.

We provide picture-documentation of anything of

importance to the customer in order to provide an ease of

mind that cheap components are not being used.

Laser-cut V-shaped False Bottom Filter

with slits that have a width of 0.7 to 0.9mm.

Left: Weighing the Butterfly Valve to ensure that all of the valves

have the same weight and that the material is Stainless Steel 316.

Right: Checking the engraving that confirms the material of the

Butterfly Valve and the diameter of the valve.

Red Arrow: Base of the top man-way that is welded onto the fermenter.

Yellow Arrow: “Lid” of the top man-way that is screwed onto the fermenter.

Left: This is the top man-way that most factories in China use when producing a fermenter.

The "Lid” is very thin compared to the base that is welded onto the fermenter.

Right: This is the top man-way that is used at Jinan XIMO International Trade Co., LTD. The

“Lid” is almost as thick as the base that is the base that is welded onto the fermenter. This

eliminates the possibilities of the man-way deforming over time due to the pressures it will

encounter as well as ensure the safety of all personnel handling the equipment.

We Highly Endorse Both Efficiency and Safety

Here at Jinan XIMO, we want to guarantee our customers

that the equipment we want to provide them is both

efficient and safe to use.

We do not take any shortcuts during our production, which

is why we use the best materials in order to allow ourselves

to properly manufacture a system that will help minimize

usage of materials (ingredients, cleaning materials, etc.)

and at the same time protect anyone that might need to

operate the equipment.

Example of One of the Collector tubes at

the bottom of the brew kettle/whirlpool

tank that has been properly polished in

order to eliminate a contamination point as well as facilitate the cleaning process.

Properly polished interior of a fermenter (0.3μm) that will prevent

contamination points and can be efficiently cleaned without the need to

scrub the interior.

Improved fermenter design for the man-way installation (Right)

Contrary to the traditional production method (Left), our new design (Right)

offers an additional safety feature that helps increase the amount of pressure

that the fermenters can withstand from 0.2Mpa (2 Bar) to 0.3Mpa (3Bar).

Interior wiring of the fermenters to avoid issues with dangling cables.

We Provide our Customer With

Convenience and a Beautiful Final Product

We take into consideration the objectives of our client and

provide modifications accordingly to the equipment. We

will do our best to provide our customer with different

options or alternatives that can be done in order to attain

the desired goal that they are looking for.

In this manner, the client will receive a brewery equipment

that is not only convenient, efficient and safe but also

extremely elegant and appealing.

Finalized 300L Brew House with a copper finish.

Finalized 600L fermenters with a mirror polished exterior.

Finalized Equipment (Rear View)

Finalized Equipment (front view.)

Thank You For Your

Time!

FOR MORE INFORMATION, PLEASE VISIT OUR WEBSITE AT WWW.CHINA-XIMO.COM OR SEND US AN EMAIL AT XEAB@CHINAXIMO.COM