Chembond Chemicals - K fix products presentation

K – Fix Products

Introduction

• Chembond Chemicals Limited is a known name in India, manufacturing a diverse range of specialty chemicals like – water treatment, metal treatment, construction chemicals, high performance coatings and industrial biotech products.

• The Construction Chemicals Division of Chembond offers a wide range of products for applications in concrete modification, waterproofing and repair and rehabilitation of structures.

• K-Fix brand of construction chemicals cater to the distribution channel and applicator segment with small pack sizes.

• K-Fix products are used across segments – housing, commercial and industrial and are engineered to perform in Indian conditions. It is available for distribution channel and for professional applicators .

KEM PROOF 71Bituminous Elastomeric Waterproofing

CoatingFeatures :• Cold applied, user friendly• Sufficient open time• Easily brushable• Prevents fungal and bacterial growth• Highly impermeable• Safe and non-flammable

Coverage : Approx. 15 - 20 sq.ft./2 coats/ kg300 microns DFT in 2 coats/kg depending on site conditionsPack Size :1 kg; 5 kg

KEM PROOF 71Bituminous Elastomeric Waterproofing

Coating

KEM PROOF 72Elastomeric Waterproofing Coating

Features:• Highly impermeable• Flexible and durable• Protective and decorative• Aesthetic appeal and self curing• Can be tinted with water based strainer• Suitable for cracks up to 0.5mm

KEM PROOF 72Elastomeric Waterproofing Coating

Coverage :Approx. 30 - 35 sq.ft./2 coats/kg100 - 110 microns DFT in 2 coats/kg depending on site conditions

Pack Size :1 kg; 5 kg

KEM BRUSH 732 - Pack Acrylic Flexible Waterproofing Slurry

Features:• Crack bridging property• Resistance to salts and alkalies• Delays carbonation• Excellent impermeable coat• Non-toxic and non-hazardous• Suitable for drinking water tanks

KEM BRUSH 732 - Pack Acrylic Flexible Waterproofing Slurry

Coverage :

• 8 sq.ft./kg for 2 coats for minimum thickness of 1 mm (DFT)• 15 - 25 mm thick cementitious screeding for protection against physical damage

Pack Size :3 kg; 15 kg

KEM BRUSH 732 - Pack Acrylic Flexible Waterproofing Slurry

KEM PLAST 74Integral Liquid Mortar Plasticizer

Features:• Increases mortar workability• Reduces rebound losses• Reduces shrinkage cracks• For brick laying mortar• For internal and external plaster• Easily miscible with water

Recommended Dosage :

200 g KEM PLAST 74/50 kg cementPack Size :

1 kg; 5 kg; 10 kg; 20 kg

KEM PLAST 74Integral Liquid Mortar Plasticizer

KEM PROOF 75Polymer Water Proofing

Features:• Improves tensile, compressive and flexural strength• Cement modifier• Indoor and outdoor applications• Good bonding agent• Apt for all cementitious substrates

KEM PROOF 75Polymer Water Proofing

Pack Size :

1 kg; 5 kg; 10 kg; 20 kg

KEM PROOF 77Integral Liquid Water Proofing

Features:• Confirms to IS: 2645• Water impermeable construction• For mortar and concrete• Reduces porosity• Highly cohesive• Reduces rebound losses

Coverage :200 g KEM PROOF 77/50 kg cement

Pack Size :

200 g; 1 kg; 5 kg; 10 kg; 20 kg

KEM PROOF 77Integral Liquid Water Proofing

KEM REPEL 78External Silicone Water Repellent Surface

SealerFeatures:• Protects and preserves facades• Reduces efflorescence• Preserves surface colour• Clear, non-staining coat• Easily brushable and sprayable• Breathable coat

Coverage :

Approx. 7 - 10 m2/l/coat depending on substrate porosity

Pack Size :

1 kg

KEM REPEL 78External Silicone Water Repellent Surface

Sealer

KEM REPEL 79External Silone-Siloxane Water

RepellentSurface SealerFeatures:• Deep penetrating, long-lasting• Colourless and non-staining• Protects surface from discolouration• Effective injection liquid material• Clear, non-staining coat• Suitable for rising dampness

Coverage :

4 - 5 m2/l/coat depending on substrate porosity

Pack Size :

1 kg

KEM REPEL 79External Silone-Siloxane Water

Repellent Surface Sealer

KEM PROOF 80Integral Powder Waterproofing Compound

Features:• Confirms to IS: 2645• Water impermeable construction• For mortar and concrete• Makes the mix cohesive and dense• Economical• Compatible with all types of cements

Recommended Dosage :

1 kg KEM PROOF 80/50 kg cement

Pack Size :

1 kg

KEM PROOF 80Integral Powder Waterproofing Compound

KEM PROOF 81Crystallizing Waterproofing Coat for Concrete

CapillariesFeatures:• Penetrates and waterproofs• Remains active and protects• Resistant to positive and negative pressure• Used as admix in concrete and mortars• Waterproofs by crystalizing• Withstands high hydrostatic pressure

KEM PROOF 81Crystallizing Waterproofing Coat for Concrete

Capillaries

Coverage :

Approx. 6 - 8 sq.ft./kg for 2 coats depending on the substrates

Pack Size :

25 kg

KEM PROOF 81Crystallizing Waterproofing Coat for Concrete

Capillaries

KEM PLUG 82Leak Plugging Mortar

Features:• Rapid setting• Quick strength gain• Easy to use• Immediately effective• Apt for concrete and masonry surfaces

KEM PLUG 82Leak Plugging Mortar

Pack Size :

1 kg

KEM DAMP 832- Pack Water-based Epoxy Damproofing

Features:• Treats damp surfaces• Tough and durable coating• Reduces water permeability• Non-toxic• Can be diluted with water• Compatible with OPC cement

KEM DAMP 832- Pack Water-based Epoxy Damproofing

Coverage :• As a coat: 35 - 40 sq.ft./kg for 2 coats• As a putty: 6 - 8 sq.ft./kg for a coat

Pack Size :

1500 g, 1 kg

KEM DAMP 832- Pack Water-based Epoxy Damproofing

KEM FIBRE 84Mono Filament PP Fibre Reinforcement

for Concrete and Mortar

Features:• Can replace wire mesh in factory and warehouse floors• Inhibits intrinsic cracking in concrete• Disperses uniformly throughout the mix• Improves finishing characteristics• Improves concrete durability• Increases impact and abrasion resistance• Rustproof• Impervious to alkali attack• Reduced risk of subsequent damage

KEM FIBRE 84Mono Filament PP Fibre Reinforcement

for Concrete and Mortar

Recommended Dosage :

0.9 kg/m2

0.125 kg/bag of cement.

Pack Size :

125 g

KEM FIBRE 84Mono Filament PP Fibre Reinforcement

for Concrete and Mortar

HYDROSHIELD 85Hi-Build Elastomeric waterproofing Flexicoat system

Features:• Single component• Absolutely ready to use system• Formulated to withstand harsh climatic conditions• Protects and waterproof various substrates• Excellent flexibility which accommodates the running cracks• Absolutely non – flammable and non – hazardous• Withstand temperature from – 50C to 1000C

COVERAGE:1.2 to 1.4 Kg / m2 /coat (varies as per the site condition)Coat thickness approximately 1.0 mm for 2 coats (WFT)

Pack Size :10 kg & 20 kg

HYDROSHIELD 85Hi-Build Elastomeric waterproofing Flexicoat system

KEM PROOF 86Elastomeric Waterproof Exterior Coating

Features:• Capable of resisting movements in structures and has good crack bridging and water proofing properties due to its good film thickness• Excellent elasticity (<100% at 100 - 125 microns DFT). At the same time, it is tough enough to withstand heavy rains• Has longer service life due to excellent UV resistance. • Good resistance to fungus and algal growth• Good breathability and permeability to water vapour• Non-toxic coating• Low dirt pick up due to low tack-free time• Ready to use and easy to apply using brush roller and spray• Ensures desired thickness as there is no need for additional water for dilution.

KEM PROOF 86Elastomeric Waterproof Exterior Coating

KEM PROOF 86Elastomeric Waterproof Exterior Coating

COVERAGE:3-4.5 m2/litre for 2 coatsNote: Coverage may vary depending upon the texture, porosity and condition of the surface.

Pack Size :5 litre, 20 litre

KEM PROOF 87Elastomeric Waterproof Exterior CoatingFeatures:• Good resistance to UV and atmospheric gases and salts ensures excellent durability• Good tensile strength and elongation ensures crack bridging and movement accommodation• Highly resistant to water

KEM PROOF 87Elastomeric Waterproof Exterior Coating

COVERAGE:2 - 2.5 m2/litreNote: coverage may vary depending upon the texture, porosity and condition of the surface.

Pack Size :5 litre, 20 litre

KEM BOND 50Cement Modifier Acrylic Bonding Agent for Repair

Features:• Excellent adhesion• Highly flexible• UV stable• Compatible with all types of cements• Used in polymer modified mortar• Self curing

KEM BOND 50Acrylic Bonding Agent

Pack Size :1 kg; 5 kg

KEM CRACKFILL 51Flexible Acrylic Crack Filler

Features:• Ready to use• UV and water resistant• Easy to apply and finish• Rapidly forms tough, flexible seal• Paintable after 24 hours• Withstands temperature variations

KEM CRACKFILL 51Acrylic Crack Filler

Coverage :

Approx 25 RMT/kg for 5mm x 5mm crack depending on site conditions

Pack Size :

1 kg

KEM SEAL 52White cement Based Polymer Modified

Surface Crack RepairFeatures:• Waterproofing and crack bridging• Non-shrink, non-sag• For concrete and plaster surfaces• Excellent adhesion• Single component• Accommodates movements in cracks

Coverage :

30 RMT/kg for 6mm X 6mm

Pack Size :

25 kg

KEM SEAL 52White cement Based Polymer Modified

Surface Crack Repair

KEM SEAL 53Polymer Modified Cementitious Crack Sealer

Features:• Durable and waterproof• Non-shrink• Non-sag• Excellent adhesion• Single component• Accommodates movements in cracks

Coverage :

Approx 25 RMT/kg for 5mm x 5mm crack depending on site conditions

Pack Size :

1 kg

KEM SEAL 53Polymer Modified Cementitious Crack Sealer

KEM MORTAR 55Fibre Reinforced, Cement Based High Build

Polymer Modified Repair MortarFeatures:• High strength• Crack resistant• Durable repair• Single component mortar• Withstands freeze and thaw cycles• Withstands carbonation

Pack Size :

25 kg

KEM MORTAR 55Fibre Reinforced, Cement Based High Build

Polymer Modified Repair Mortar

KEM MICRO 56High Strength Structural

Microconcrete Repair MortarFeatures:• Self-compacting• Rapid strength• Non-shrink• Can be pumped or poured• Eliminates honey combing• Contains no chloride

Pack Size :

25 kg

KEM MICRO 56High Strength Structural

Microconcrete Repair Mortar

KEM FLOOR 57Non-metallic Floor Hardener

Features:• Abrasion and impact resistant• Dust-proof and non-staining• Pre-mixed, easy to dry shake• For anti-skid and anti-slip flooring• Resistance to oil spillage• Suitable for old and new floors

KEM FLOOR 57Non-metallic Floor Hardener

Pack Size :

25 kg

KEM GROUT 58Cementitious Expanding Grouting Aid

Features:• Compensates for shrinkage• Increases fluidity• Water reduction• Impermeable to water• Chloride and iron free• Compatible with all types of cements

Recommended Dosage :

1 kg KEM GROUT 58/50 kg cement

Pack Size :

1 kg

KEM GROUT 58Cementitious Expanding Grouting Aid

KEM RUSCON 59Rust Converter

Features:• Converts rust instantly• Passivates iron and steel• Single step action• Durable coat• Easily brushable• Excellent coverage

KEM RUSCON 59Rust Converter

Coverage :

Approx. 8 - 10 m2/l in 2 coats

Pack Size :

1 liter

KEM GELL 602 component Resin Based

Multipurpose Epoxy Adhesive Features:• Ease of application• Resistant to water and chemicals. • Bonding on various surfaces.

Pack Size :500g

Mixing Ratio Base Harden

er370 g 130 g

KEM GELL 602 component Resin Based

Multipurpose Epoxy Adhesive

KEM BOND 76Multipurpose SBR Latex for Repairs

Features:• Excellent bonding agent• Increases strength, reduces permeability• Corrosion prevention• Cement modifier• Admixture for concrete and mortar• Resists carbonation effect

Pack Size :200g; 500g; 1 kg; 5 kg; 10 kg; 20 kg

KEM BOND 76Multipurpose SBR Latex for Repairs

KEM JOINT 31Gun Grade Construction Joint SealantFeatures:•Complies to BS 4254-1983• Excellent adhesion, non-sag• Flexible rubber seal• Sustains weather cycles• Two components• Excellent repairability property

Pack Size :

320 g Base + 3.680 Hardener = 4 kg

KEM JOINT 31Gun Grade Construction Joint Sealant

KEM JOINT 32Pour Grade Construction Joint SealantFeatures:• Complies to BS 5212-1983• Excellent adhesion• Forms a tough, permanent elastic seal• Wide application in constructions• Durable• Excellent repairability property

Pack Size :320 g Base + 3.680 Hardener = 4 kg

KEM JOINT 32Pour Grade Construction Joint Sealant

Features:• Easy to apply• Excellent preparation• Single component• Brushable• UV resistance• Fast curing

KEM PRIMER 33Primer for Joint Sealant

KEM PRIMER 33Primer for Joint Sealant

Mixing Ratio :10 - 30 m2/l depending on the surface porosity

Pack Size :500 ml

KEM TILE 21Polymer Modified, General Purpose

Cementitious Tile AdhesiveFeatures:• Most suitable for all tiles• Thick and thin bed application• Non-skid and waterproof• Excellent adhesion• No admix required• For indoor and outdoor application

Pack Size :20 kg; 25 kg

KEM TILE 21Polymer Modified, General Purpose

Cementitious Tile Adhesive

KEM TILE 22

Polymer Modified, Heavy Duty High Performance Tile Adhesive

Features:• For stone and tile cladding• Indoor, outdoor and tile-on-tile use• Flexible and waterproof• Excellent adhesion• No admix required• For indoor and outdoor application

Pack Size :25 kg

KEM TILE 21Polymer Modified, General Purpose

Cementitious Tile Adhesive

KEM TILE 23Polymer Modified, General Purpose

White Tile AdhesiveFeatures:• For marble and glass mosaic• Fast setting, ready to use• Flexible and waterproof• Excellent adhesion• For indoor and outdoor application• Needs no hacking

Pack Size :25 kg

KEM TILE 23Polymer Modified, General Purpose

White Tile Adhesive

KEM TILE 24Polymer Modified Cement Based Tile Grout

Features:• Waterproofs joints• Excellent adhesion• Non-shrink• Single component• Ready to use• For indoor and outdoor application

Coverage :

Approx. 40 - 50 running meters/kg for 3mm X 5mm joint, depending on tile size and joint dimensions

Pack Size :

500 g; 1 kg

KEM TILE 24Polymer Modified Cement Based Tile Grout

KEM TILE 25Tile Cleaner

Features:• Rapid action• Non-staining• Prevents microbial growth• Single component• Economical• With Lime Fragrance

How to use:Can be used on all ceramic and porcelain surfacesFor Wet or Sponge Mopping:• Dilute 1 part KEM TILE with 2 parts water by volume.• Apply solution with a clean mop or sponge.• Let the solution dry on the surface.• Rinsing is not necessary. For Spray Cleaning:• Dilute 1 part KEM TILE 25 with 2 parts water by volume.• Spray on surface and let it set for 1 minute.• Wipe off with a clean soft cloth.

KEM TILE 25Tile Cleaner

Coverage :

4 - 6 m2/l depending on the substrate conditions

Pack Size :

500 ml; 1 Ltr

KEM TILE 26Epoxy Resin Based Tile Adhesive & Grout

Features:•Good adhesion to steel, concrete & tiles•Unaffected by water when cured.• Fast application possible.•Can be easily cleaned off with water during initial set•Highly resistant to a wide range of industrial •chemicals.•Suitable for grouting joints from 2 mm – 20 mm widths.

KEM TILE 26Epoxy Resin Based Tile Adhesive & Grout

KEM TILE 26Epoxy Resin Based Tile Adhesive & Grout

Coverage :

For tile size 200 mm X 100 mm X 6 mm and joint width of 5 mm, about 0.480 litre of KEM TILE 26 would be required/m2.

Pack Size :

1 kg

Thank You